Friction Modifier for lubricating oils
FM 4601 Friction Modifier
FM 4601 friction modifier is a liquid methyl benzotriazole derivative, which is a flowing liquid at room temperature, has good oil solubility, and has excellent copper corrosion inhibition, rust resistance, oxidation and glue resistance, and bearing capacity. In particular, its oil solubility is very good, far better than the general benzotriazole oil-based agents on the market, so its application field has also been expanded.
It can be used in various gear oils, anti-wear hydraulic oils, oil film-bearing oils, and greases, especially for the preparation of various lubricating oil compounds and anti-rust oils and greases. Dosage: 0.1-1.0%.
FM 4601 Friction Modifier P&C Properties
| Item | Typical Value | Method |
| Appearance | Light yellow /amber transparent liquid | Visual |
| Flash Point (COC), ℃ | 190 | ASTM D92 |
| Copper corrosion @100℃*3h , rating | 1a | ASTM D130 |
| Moisture，% | 0.05 | ASTM D260 |
FM 4601 Friction Modifier Product Benefits
- Good oil solubility.
- It has the effect of reducing friction and inhibiting copper corrosion.
Package, Storage, and Transportation for FM 4601 Friction Modifier
The product is packed in iron drums, with a net weight of 180 kg per drum. Suitable for all modes of transport.
The maximum temperature of this product should not exceed 75 degrees during storage, loading and unloading and oil blending, and if it is stored for a long time, the maximum temperature should not exceed 45 degrees, and the product has a shelf life of two years.
This product is non-flammable, non-explosive, non-corrosive, and does not require special protection. In case of contact with the skin, rinse thoroughly with detergent and water.
FM 4501 Friction Modifier
FM 4501 friction modifier is Molybdenum di-n-butyl dithiocarbamate (MoDTC). This product is an organo-molybdenum friction modifier applied to greases to provide anti-oxidation and anti-wear properties at high temperatures and for long operating conditions, far superior to molybdenum disulfide. Dosage: 1.0~3.0%.
FM 4501 Friction Modifier Product P&C Properties
| Item | Typical Value | Method |
| Appearance | Yellow solid powder | Visual |
| Density @20℃, g/cm3 | 1.60 | ASTM D4052 |
| Molybdenum content, % | 27.5 | ASTM D5185 |
FM 4501 Friction Modifier Product Benefits
- Good performance at high temperatures.
- It has a good anti-friction and anti-wear effect in synergy with ZDDP.
Package, Storage, and Transportation for FM 4501 Friction Modifier
The products are packed in paper drums, with a net weight of 20 kg per drum, which is suitable for various transportation methods.
The short-term maximum temperature of product storage and transportation should not exceed 75 °C; For long-term storage, the maximum temperature should not be higher than 45°C, and it should be stored in a dry, clean, and ventilated warehouse. The product has a shelf life of two years.
This product is non-flammable, non-explosive, non-corrosive, and does not require special protection. In case of contact with the skin, the product can be thoroughly washed off with detergent.
FM 4502 Friction Modifier
FM 4502 friction modifier is molybdenum dialkyl dithiocarbamate (MoDTC). This product is a liquid organic molybdenum friction modifier, with good chemical stability, thermal stability, outstanding anti-friction and anti-wear properties, and oxidation resistance. It is used in gasoline engine oil, industrial oil, and grease to greatly improve its tribological properties. Dosage: 0.2~1.0%.
FM 4502 Friction Modifier Product P&C Properties
| Item | Typical Value | Method |
| Appearance | Brown liquid | Visual |
| Density @20℃, kg/m3 | 1090 | ASTM D 4052 |
| Flash Point (COC), ℃ | 180 | ASTM D92 |
| Kinematic Viscosity @100℃, mm2/s | 28.5 | ASTM D445 |
| S content，% | 11.0 | ASTM D1552 |
| Mo content，% | 9.5 | ASTM D5185 |
FM 4502 Friction Modifier Product Benefits
- Good performance at high temperatures.
- It has a good anti-friction and anti-wear effect in synergy with ZDDP.
Package, Storage, and Transportation for FM 4502 Friction Modifier
The product is packed in iron drums, with a net weight of 200 kg per drum. Suitable for all modes of transport.
The maximum temperature of this product should not exceed 75 degrees during storage, loading and unloading, and oil blending, and if it is stored for a long time, the maximum temperature should not exceed 45 degrees, and the product has a shelf life of two years.
This product is non-flammable, non-explosive, non-corrosive, and does not require special protection. In case of contact with the skin, rinse thoroughly with detergent and water.
FM 4504 Friction Modifier
FM 4504 friction modifier is a molybdenum ester complex. This product is a sulfur-free liquid organic molybdenum friction modifier with good chemical stability, thermal stability, outstanding anti-friction and anti-wear properties, and oxidation resistance. It is used in gasoline engine oil, industrial oil, and grease to greatly improve its tribological properties. Dosage: 0.2~1.0%.
FM 4504 Friction Modifier Product P&C Properties
| Item | Typical Value | Method |
| Appearance | Brown liquid | Visual |
| Density @20℃, kg/m3 | 1050 | ASTM D 4052 |
| Flash Point (COC), ℃ | 180 | ASTM D92 |
| Kinematic Viscosity @100℃, mm2/s | 30.0 | ASTM D445 |
| N content，% | 2.5 | ASTM D3228 |
| Mo content，% | 7.5 | ASTM D5185 |
FM 4504 Friction Modifier Product Benefits
- High molybdenum content, no sulfur or phosphorus.
- It has a good synergistic anti-friction and anti-wear effect with ZDDP.
Package, Storage, and Transportation for FM 4504 Friction Modifier
The product is packed in iron drums, with a net weight of 200 kg per drum. Suitable for all modes of transport.
The maximum temperature of this product should not exceed 75 degrees during storage, loading and unloading, and oil blending, and if it is stored for a long time, the maximum temperature should not exceed 45 degrees, and the product has a shelf life of two years.
This product is non-flammable, non-explosive, non-corrosive, and does not require special protection. In case of contact with the skin, rinse thoroughly with detergent and water.
FM 4505 Friction Modifier
FM 4505 friction modifier is molybdenum dialkyl dithiophosphate (MoDDP). This product is a liquid organic molybdenum friction modifier, with good chemical stability, thermal stability, outstanding anti-friction and anti-wear properties, and oxidation resistance. It is used in gasoline engine oil, industrial oil, and grease to greatly improve its tribological properties. Dosage: 0.2~1.0%.
FM 4505 Friction Modifier Product P&C Properties
| Item | Typical Value | Method |
| Appearance | Brown liquid | Visual |
| Density @20℃, kg/m3 | 1020 | ASTM D 4052 |
| Flash Point (COC), ℃ | 180 | ASTM D92 |
| Kinematic Viscosity @100℃, mm2/s | 8.0 | ASTM D445 |
| S content，% | 11.0 | ASTM D1552 |
| Mo content，% | 9.5 | ASTM D5185 |
FM 4505 Friction Modifier Product Benefits
- Good oil solubility
- Good synergy
- Excellent anti-friction and anti-wear properties.
Package, Storage, and Transportation for FM 4505 Friction Modifier
The product is packed in iron drums, with a net weight of 200 kg per drum. Suitable for all modes of transport.
The maximum temperature of this product should not exceed 75 degrees during storage, loading and unloading, and oil blending, and if it is stored for a long time, the maximum temperature should not exceed 45 degrees, and the product has a shelf life of two years.
This product is non-flammable, non-explosive, non-corrosive, and does not require special protection. In case of contact with the skin, rinse thoroughly with detergent and water.